| Member | Post |
|---|---|
|
I'm looking to buy a blazer this week. It has a pro hopper setup in it. I want to pull out the setup and just lower it. I already have a buyer for the setup. I just need to know that i have to do to make it stock. Do i need new upper and lower a-arms....what about the rear end????? Thanks for nay help you can give me. |
|
|
in the front u wont have to do nothing just put new springs in but as for the back it is all according if it has a coil over or coil under u might have to have cups welded back in place to hold the back springs but my opinion i say leave the juice on it why take it off just to lower it u cant lift an lay just the way it is |
|
|
If they did any extensions in the front you will need to replace the uppers if not just do as Mitchell stated. Husband to a Queen father to royal heirs. |
|
|
if its still got the mono leaf in the rear at least you will be ok,just remove the setup,for the front if extensions done you have to replace to upper a-arms,and of course depending on what springs you have in the front you may need to get a set of drop coils,also if you want the front slammed make sure you got drop spindles as well.. the lunatik formerly known as pugzly has returned to reclaim my reign |
